Several reasons for mold breakage in Jiangsu Qidong stamping processing plant + 20 mold R u0026 D engineers

Jiangsu Qidong stamping processing plant, regarding the causes of mold breakage during stamping processing, Xiaoshuo helped to fight and sort out some useful knowledge, let's take everyone to understand: 1. Hot buried: the quenching temperature is too high or not enough, Tempering times, temperature and time are not appropriate, and quenching method time is not grasped; the problem does not appear until after a period of use. 2. Stamping and stacking: the overlap of the blanks will continue to be pressed, usually because the stripping board is broken. 3. Waste blockage: the blanking hole is not drilled or the size is not consistent, or it is not cleaned in time when it falls on the bed. The punch and the lower template are damaged more. 4. The punch is dropped: it is not sufficiently fixed or suspended, or the screw is too thin and the strength is not strong, or the punch is broken. 5. No escape hole: The size or depth of the escape hole of the punch pressing plate is not enough, and the escape part of the punch and stripping plate is usually damaged by the stripping plate. 6. Foreign matter entering: the product bounces back, mold parts collapse and fall, screws protruding from the mold surface or other items enter the mold, which may damage the lower mold, stripping plate, punch, and guide post. Hardware, 15 years of focus on Dongguan Longhua stamping processing plant, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!