Shaanxi metal stamping parts, what are the process requirements of stamping parts + hundreds of stamping processing production equipment

The hardware production staff of the manufacturer in charge of the hardware stamping parts in Shaanxi said that there are a few technical requirements for the hardware stamping parts. The following Xiaoshuo sorted out some related content and let everyone take a look: 1. In the structural shape, the surface and combination of simple and reasonable structure should be used, and at the same time, the number of processed surfaces and the processing area should be as small as possible. 2. Choose a reasonable method of blank preparation in mechanical manufacturing, which can directly use profile, casting, forging, stamping and welding. The selection of the blank is related to the specific production technical conditions, and generally depends on the production batch, material properties and processing possibilities. 3. The requirements of metal stamping forming performance, in order to facilitate stamping deformation and the improvement of the quality of the parts, the material should have good plasticity, small yield ratio, large plate thickness directivity coefficient, small plate directivity coefficient, and material yield The ratio of strength to elastic modulus is small. The separation process does not require a material with good plasticity, but a material with a certain degree of plasticity. 4. Specify appropriate manufacturing accuracy and surface roughness. The cost of metal stamping parts will increase with the improvement of accuracy, especially in the case of higher accuracy, this increase is very significant. Therefore, high accuracy should not be pursued when there is no sufficient basis. Similarly, the surface roughness of metal stamping parts should also be appropriately specified according to the actual needs of the mating surface. Hardware, 15 years of focus on Shaanxi metal stamping parts, 20000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy up to 0.01 mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!