Shanghai metal stamping, you are more satisfied with your choice after considering the characteristics of the material

Shanghai Metal Stamping, share with you that some raw materials are not suitable for some processing due to their own characteristics, and customers should understand the properties of some materials in the design to avoid failing to achieve the designed functions. For Shanghai hardware stamping, manufacturers have analyzed that the punching process should not use brittle and hard materials. Punching, blanking and trimming should not be used. Brittle and hard materials should not be used. The more brittle the material, the more likely it is to tear during punching; if the material is too hard, such as high-carbon steel, the flatness of the cutting section is very large, especially for thick materials. The material with good elasticity and high flow limit can get a good section. Especially soft materials such as low-zinc brass can be punched out smooth and small inclination section. Hardware, 15 years of ingenuity focused on Shanghai hardware stamping, 20,000+ sets of customized mold production experience, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, and 16 quality inspections to strictly control the quality. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!