Shield manufacturers, teach you how to use +15 years of experience, stamping accuracy can reach 0.01mm

There are a few points to pay attention to when using the shielding cover produced by the shielding cover manufacturer. Customers who know these points are more convenient and effective for the use of the shielding cover. What are the specific contents? The following Xiaoshuo sorted out some information, and let everyone know: 1. The tray where the shielding cover is placed is too large to move, and it is easy to swing during patching, resulting in failure to absorb. The material must be placed in the tray, about 1.0MM If the space is too large, the material will swing, and the material may not be taken up if it is too small 2. The size of the reclaiming point of the shielding cover should be appropriate. The reclaiming point should be in the middle of the material as much as possible. The size of the reclaiming point is preferably Φ6.0mm. The larger the reclaiming point, the higher the stability of the patch and the greater the efficiency. high. Hardware, 15 years of focus on shield manufacturers, rich experience in custom processing and production of 20,000+ sets of molds, shield production control at 0.07mm, daily production capacity of 3 million strokes and 16 quality inspections strictly for quality control. It can quickly solve your time-critical problems, solve your product accuracy problems, and solve your shielding cover quality needs. Choose, choose rest assured!