One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
Six techniques and methods for maintenance of pneumatic tools in my country
The so-called pneumatic tool refers to a tool that uses compressed air to drive a pneumatic motor to output kinetic energy. It is a type of hardware product often used in modern construction and machinery industries. With pneumatic tools, people in related industries will be able to work. It’s convenient, but people also need to pay attention to the performance and methods of pneumatic tools. How to use and maintain pneumatic tools? See how to help you!
Methods and techniques of using and maintaining pneumatic tools:
1. Ensure the correct substitute air supply system: the inlet pressure at the tool inlet (not the outlet pressure of the air compressor) is generally 90PSIG (6.2Kg/cm^2), too high or too low will damage the tool The performance and life span. The air intake must contain sufficient lubricating oil so that the pneumatic motor in the tool can be fully lubricated (a piece of white paper can be placed on the exhaust of the tool to check whether there is oil stains. Normally, there is oil stains). The intake air must be completely free of moisture. It is not appropriate if the compressed air is not supplied with an air dryer.
2. Do not arbitrarily remove the parts of the tool and then operate it, except that it will affect the safety of the operator and cause the tool to be damaged.
3. If the tool is slightly faulty or cannot achieve the original function after use, it can no longer be used, and it must be checked immediately.
4. Use all kinds of tools, be sure to follow various safety regulations and instructions for operation.
5. Use appropriate tools to work. Oversized tools can easily cause work injuries, and too small tools can easily cause tool damage.
6. Check and maintain the tools regularly (about once a week), add butter to the rotating parts such as bearings, and add oil to the air motor parts.
Of course, in order to ensure that pneumatic tools will not be damaged during use, it is recommended that if you do not operate pneumatic tools at all, then it is best to find professional personnel for construction and use, and not to operate and use by yourself.