Six tips to reduce stamping scrap rate

Metal stamping parts processing, including blanking, bending, deep drawing, forming and finishing process. Dongguan metal stamping parts processing materials is mainly hot rolled or cold rolled ( Mainly cold-rolled) Metal materials, such as carbon steel, alloy steel, spring steel, tinplate, galvanized sheet, stainless steel plate, copper and copper alloy plate, aluminum and aluminum alloy plate, etc. Stamping parts processing materials is mainly hot rolled or cold rolled ( Mainly cold-rolled) Metal materials, such as carbon steel, tinplate, copper and copper alloy plate, galvanized sheet, aluminum and aluminum alloy plate, etc. Prevention of waste metal stamping parts processing, and the main measures: 1, for the each link should be stipulated in the technical process of comprehensive strictly obeyed; 2, used by the press and die tooling equipment, should guarantee the work under normal working condition. 3, insist on production system, such as artifacts and transfer ware must use the appropriate workstation, otherwise will be crushed and scratch the surface of the workpiece surface affect the workpiece quality. 4, in stamping process to ensure that the mold cavity clean, to organize an organized workplace processed workpiece to be well organized. About the causes of waste in stamping parts processing and analysis. 5, establish a strict inspection system in the production process, stamping pieces must be comprehensive inspection, after inspection qualified can be put into production, at the same time, strengthen the inspection, when accidents should be handled in a timely manner; 6, raw materials must be consistent with provisions of technical conditions, Strict inspection specifications and grades of raw materials, in the case of conditional to require high dimensional accuracy and surface quality of workpiece in laboratory tests. A: explanation of problems easily in the process of stamping parts processing