One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
Specific requirements for mechanical presses for stamping production equipment
The mechanical press of the stamping parts production equipment converts the rotary motion of the motor into the linear reciprocating motion of the slider through the crank connecting rod mechanism, and punches the stamping parts. The purpose of the research and development of the manipulator is to realize the automation of the loading and unloading of the punching press, that is, the products punched out of the previous process are sent to the die of the punching machine accurately and quickly through the manipulator, and after the punching is completed, the stamped products , Use the robot to take out at high speed, and put the stamped products on the conveyor belt. The specific requirements are as follows: 1. The semi-finished products can be accurately sent to the punch die for stamping, and the stamped parts are taken out and placed in the designated storage location; 2. The work between the loading and unloading manipulator and the punch needs to be coordinated with each other , To ensure that the manipulator and the punch do not interfere and collide; 3. The mechanical structure design is simple and reasonable, the operation is stable, there is no rigid impact, the vibration of the workpiece is reduced, the reliability is good, and the noise is low during operation; 4. There are two kinds of manual and automatic control. Mode, automatic mode is used under normal operation conditions, manual mode is used for equipment debugging, installation and later maintenance, etc.; 5. The main console is equipped with indicator lights and alarm devices to indicate normal operation and alarms during control. Status; 6. The original structure of the punch press and the location layout of the original production line should not be changed as much as possible to reduce the cost and risk of upgrading. Recommended article: Causes of bumps in metal stamping parts and preventive measures Previous: Brief introduction of mechanical presses for stamping parts processing equipment