Spring washers and flat washers, installation and use matters +15 years of strength manufacturers

Spring washers and flat washers, before installation and use, not only need to choose the right material for the flat washers, but also during the installation, you need to pay attention to the following matters, Xiaoshuo will understand with you: 1. The gasket must be placed in the middle of the flange This point is particularly important for raised face flanges; 2. Ensure the flatness and processing accuracy of the sealing surface; 3. The connecting bolts must be evenly and symmetrically tightened; 4. The metal washers must be used to ensure uniform load, and torsion is used when tightening the bolts. Torque wrench; hardware, 15 years of craftsmanship focusing on spring washers and flat washers, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, the stamping accuracy can reach 0.01mm, 16 quality inspections Strict checks at all levels. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!