Stainless steel drawing parts processing, long drawing die design technology provides satisfactory results

The processing of stainless steel drawing parts usually encounters surface cracking and wrinkling problems in mold design, production, and production. Mold designers need to continuously enrich their experience, grow their own technology, and work hard to provide customers with satisfactory results. In the processing of stainless steel drawing parts, a large amount of heat is generated during drawing and forming. Due to uneven heat dissipation or too concentrated heat, the surface of the workpiece will crack or accumulate, forming the surface characteristics of the drawing grain. After the stainless steel drawing part is processed and formed, the outer wall of the stainless steel workpiece will form a drawing grain, and then through the extrusion process of the extrusion die, it can not only tighten and supplement the crack of the drawing grain, but also can replenish the drawing material. The texture formed by the texture is accumulated for smoothing treatment. The outer wall of the stainless steel workpiece is smoothed under the squeezing action of the extrusion die to meet the surface treatment of the inner and outer walls of the stainless steel workpiece in the subsequent process, and to make the stainless steel workpiece meet the requirements of qualified production. Hardware, 15 years of ingenuity and focus on stainless steel drawing parts processing, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, stamping accuracy up to ±0.01mm, 16 quality inspection layers Strictly check the quality. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!