Stainless steel shell plating nickel matters needing attention

Precision electronic technology co. , LTD is a dedicated precision stamping processing enterprise. Professional production and processing of stainless steel shrapnel, beryllium copper strip, hardware terminal, stretching pieces, small lead frame and other hardware components. Products are widely used in the connector, micro motor, acoustic components, sensors, automotive electronics, new energy, medical electronics, intelligent household, diodes and IC packaging and other industries. Stainless steel shrapnel nickel plating layer what problem should note? To ensure that the product surface quality and performance. One, the surface film layer must remove, or coating roughness is not easy to light. Second, the stainless steel plating shall not directly back into nitric acid, and should be electrolytic removal of chromium layer, add fine in dilute nitric acid, is conducive to return when plating coating binding force. Third, in addition to the oil must be thoroughly, or it will cause poor bonding strength. Four, preparing nickel plating solution iron ions must not exceed 10 g/L, copper ions must not exceed 1 g/L. After five, plating nickel electroplating copper, cyanide copper plating not too thick, the sodium cyanide free not too low, current density is not easy to too much, otherwise may cause poor bonding force. Six, precoated with low PH nickel chloride solution, hydrochloric acid after washing for electroplating nickel. Stainless steel shrapnel processing nickel plating, pay attention to the above six o 'clock. To be sure that the product surface quality and performance. Precision contact: wish you a prosperous business, everything goes well, if you want to learn more dynamic, can scan the qr code, pay attention to the public. , is committed to precision stamping processing factory of the world's most professional electronic components