Stainless steel stamping parts, knowing these processes is more ideal for your needs [hardware]

Stainless steel stamping parts, because of the unique characteristics of the material, beautiful appearance, strong plasticity, corrosion resistance and other factors, are deeply loved by many designers. At the same time, many stainless steel stamping parts need to be polished later, and there will be some factors that affect the effect during polishing. Xiaoshuo will understand with you: 1. Surface defects of raw materials. Such as scratches, pitting, pickling, etc. 2. Material problem. If the hardness is too low, it is not easy to polish when polishing (BQ is not good), and if the hardness is too low, orange peel is easy to appear on the surface during deep drawing, which affects the BQ performance. BQ with high hardness is relatively good. 3. After deep-drawn products, small black spots and RIDGING will appear on the surface of the area with extremely large deformation, which will affect the BQ performance. Hardware, 15 years of ingenuity focused on stainless steel stamping parts, 20,000+ sets of non-standard mold customization production experience, imported and national standard raw materials, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, and stamping accuracy up to 0.01mm, 16 The quality inspection is strictly controlled at all levels. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!