Stainless steel stamping parts processing, three issues that need to be paid attention to in stamping processing

Stainless steel stamping parts processing is a very common metal material processing technology in the market. From cars and airplanes to small precision pieces and shrapnel such as rice grains. In stainless steel processing, due to the characteristics of its materials, it is still necessary to pay attention to the following three issues in production: 1. Material rebound. Deformed metal materials will rebound after being stretched. Due to the high hardness of stainless steel, the material The springback is relatively large. When planning the molding die, it is necessary to predict the springback amount of the material, and try to reduce the specification problems caused by the material springback. 2. Heat treatment Many stainless steel stamping and drawing parts have higher hardness requirements, but because the harder the material, the greater the difficulty of drawing. Sometimes it needs to be formed and then heat treated to reach the hardness requirements, but the heat-treated workpiece is prone to deformation , The amount of deformation needs to be taken into account in mold planning. 3. Tool selection 　　 The hardness of stainless steel is high, and the loss of the knife edge of the mold will be relatively large. Therefore, when choosing a tool, it is necessary to make an appropriate choice according to the hardness of the stainless steel material. Hardware, 15 years of craftsmanship focused on stainless steel stamping parts processing, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose, rest assured!