Stainless steel stamping processing, every detail of hard work is the prerequisite for qualified results

For stainless steel stamping processing, what the customer sees is only the qualified result provided by the stamping factory. Before this result, there are many processes and many processes, which need to be completed by the stamping factory. For example, mold trial and mold adjustment: 1. During mold trial, in order to test the stretching effect, you can put sandpaper on different positions on the material to test the effect, and after confirming the effect, place the movable drawbead or the movable pit at the corresponding position Array (that is, to grind a piece of plated part into pits), which is used to friction and hinder material feeding. 2. For parts with more bending, the bending should be adjusted step by step according to the process when adjusting the mold. 3. When adjusting the forming angle, you can reduce the R angle during bending or move the folding line datum to achieve the purpose of forming angle. Hardware, 15 years of ingenuity focused on stainless steel stamping processing, 20,000+ sets of mold customization and production, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, and 16 quality inspections strictly. Various types of stainless steel design, mold making and production, and post-processing experience in stainless steel stamping. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems.