Stamping factory shares with you the production process of stamping die-hardware

In a stamping processing plant, the design, production and assembly of stamping dies are the core work before stamping production. The rationalization and quality of a set of stamping dies is the prerequisite for the subsequent production. Therefore, the production of molds is important, so what are the steps through which stamping molds are made? First of all, you have to open the material. How to proceed to the next step without opening the material. Cutting, that is, roughing. Generally, a template must be roughly leveled by a planer, and then roughed and roughed by a large water mill (grinder, also known as a large grinder), leaving a certain margin (usually 50 margins are left, and the accuracy is plus or minus ten. That’s okay), and then take the heat treatment for those that need heat treatment. After the heat treatment is finished, the precision is required to be higher at this time after finishing with a large grinder. For example, if the thickness of the template is 25.00mm, then the precision must be plus or minus 0.01mm. Within. Look at the role of the template, generally one or two differences do not matter much, as long as the printed product does not have mold marks. After the grinder is processed, it is sent to the threading hole, then the thread is cut, and then the milling machine, CNC, etc. If it is a small part, it is like this: according to the size of the part, use a saw or mill with a milling machine. After roughing, the grinding machine will grind the excess. Cut off the cutting piece, and it is almost done. It depends on the situation. Either go to wire cutting or CNC (also known as a high-speed milling machine) for processing. After finishing the quality assurance measurement. The production and production of 20,000+ sets of customized stamping dies for hardware have skilled experience and rich technology. Choose stamping factory, choose, choose rest assured!