Stamping hardware, pay attention to these problems, the production quality is more qualified

Stamping hardware, there will be various abnormalities in the production, the stamping factory needs to control and deal with it in the process to provide customers with more qualified stamping hardware. Then, what are the more frequent phenomena? 1. The dimensional accuracy of the hardware of the stamping parts is not enough, and the problem points need to be found from the mold and handled. 2. The burr is very large. Most of them are caused by knife edge shovel material, which requires mold repair. 3. There are indentations on the surface, which are mostly caused by poor blanking and material falling off. 4. Strain and deformation. There is still a problem in the structure of the mold, and a fitter needs to find the problem in the mold to solve it. Hardware, 15 years of craftsmanship focusing on stamping hardware, with 20,000+ sets of stamping die customized processing and production experience, daily production capacity of 3 million punching times, 16 quality inspections strictly for quality control. It can quickly solve the time-critical problems, the hardware precision problems of stamping parts, and the quality problems of mass production.