One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
Stamping manufacturer, 0.01mm stamping accuracy + 6 items
Stamping manufacturers, in the production of stamping parts, will have many production problems and mold problems. How the stamping plant responds quickly and solves the problem in time is the key. Xiaoshuo sorted out 6 points, and we will understand with you: 1. Regularly check the die installation base of the punch turntable and stamping parts to ensure the coaxial accuracy of the upper and lower turntables. 2. The metal stamping parts should be strictly inspected before installation and use, the dirt should be cleaned, and the guide sleeve and die of the drawing stamping parts should be carefully checked for good lubrication. 3. In order to ensure the service life of the tension and compression parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the tension stamping parts. 4. When installing the mold, the stamping personnel should use soft metal manufacturing operation tools to prevent damage to the stamping parts when knocking and crushing during the installation process. 5. When the punch and die edges of the stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die edge, accelerate the wear of the die, and reduce the quality and life of the die. 6. According to the installation procedure of the mold, install the convex and concave molds on the turntable to ensure that the direction of the convex and concave drawing stampings is consistent, especially the stampings with direction requirements should be carefully installed to prevent incorrect installation and reverse installation. Hardware, 15 years of ingenuity and focus on stamping processing manufacturers, 20,000+ sets of customized mold production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!