Stamping manufacturer, metal stamping parts manufacturer, solves the distortion of turning materials + 15 years of stamping experience

Stamping manufacturers metal stamping parts manufacturers often encounter the phenomenon of material turning and distortion during stamping production. Affects productivity and quality. Xiaoshuo will work with you to understand the reasons and solutions: The reasons and solutions for the turning and distortion of the stamping parts: 1. It is caused by the burrs of the stamping parts during punching. Need to study the cutting edge, and pay attention to check whether the blanking gap is reasonable. 2. The turning, distortion and deformation of the punched parts have occurred during the punching process, which leads to poor forming after bending, which needs to be solved from the punching and unloading station. 3. It is caused by the instability of stamping parts during bending. Mainly for U-shaped and V-shaped bending. To deal with this problem, the guiding position of the stamping part before bending, the guiding position during the bending process, and the pressing of the material during the bending process to prevent the stamping part from slipping during bending are the key points to solve the problem. Hardware, 15 years of ingenuity, focus on stamping manufacturers, hardware stamping parts manufacturer, 20,000+ sets of mold customization production experience, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 strict quality inspections check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!