Stamping packaging matters

1. The selection of paper trays, styrofoam and paper strips is subject to the inspection specifications of stamping parts. The thickness of the styrofoam and the width of the paper strip must be higher than the product to prevent the product from crooked PIN, deformation and other defects. 2. When packing a full tray, the product material head should not expose the paper tape. Each plate of terminal products must be folded to check whether the products in the plate and the paper strip are not lifted up, and the PIN is crooked. 3. When making paper trays, you should pay attention to not too much white latex to prevent overflow of styrofoam and sticky products when closing. After the product is full, it should prevent the white latex from dripping on the product and causing it to be scrapped. 4. The product receiving direction and label filling must be performed in accordance with product inspection specifications. The disk surface and outer box of the product packaging must be clean and fill in the specifications. Terminal stamping parts need to be equipped with a square styrofoam outside of each plate to support the plate surface and prevent deformation caused by product stacking. 5. Products with A/B tapes need to be confirmed before the label is posted. To prevent the label from being mis-applied, it needs to be reconfirmed when packing, and whether it is placed correctly to prevent the product from being mixed. 6. Before each box is sealed, the quantity of products in the box must be checked to ensure that the inside and outside are consistent. The precision stamping factory dares to break through the technical difficulties in the stamping industry, and can mass produce stamping parts such as in-film automatic riveting parts, automatic in-mold tapping parts, and precision in-mold injection terminals. Precise contact information: Precise wishes everyone a prosperous business and all the best. If you want to learn more, you can scan the following QR code and follow the official account. , Committed to the world's most professional precision stamping processing plant for electronic parts