Stamping parts manufacturers, how to solve the stamping indentation to provide customers with qualified products

Manufacturers of stamping parts often encounter iron flashes in the mold cavity during production, and the surface of the stamping parts is crushed, resulting in poor appearance or directly affecting the use of the product. So how do stamping parts manufacturers solve this problem? 1. First check whether the iron night is falling due to the wear of the mold, or falling from the metal material during stamping. 2. If it is dropped from the mold, it may be that the wear of the mold has caused some parts to be mismatched, and it needs to be inspected and then repaired. 3. If the metal material falls during the stamping process, the stamping part manufacturer can first check whether the matching interval of each part of the mold produces a unit. 4. Some metal materials, such as copper, will cause some copper powder to fall during cold punching. You can add a blower on the edge of the mold to blow off the copper powder in time to avoid crushing. Hardware, 15 years of ingenuity and focus on stamping parts manufacturer, 20,000+ sets of mold custom processing and production experience, daily production capacity of 3 million punching times, 16 quality inspections strictly for quality control. It can quickly solve the accuracy problems of stamping parts, time-critical problems, and mass production quality problems for you. Choose, choose to rest assured.