Stamping parts processing factory shares with you the process analysis of stamping parts-hardware

There are many types of molds, which can be divided into: ①Metal processing molds according to processing goals and processing techniques. ② Processing non-metal and powder metallurgy molds. Today, Xiaoshuo talks about the method and process of mold design in stamping parts processing plants. Stamping parts must have excellent stamping processability in order to produce qualified stamping parts in a simple and economical way. Able to complete the process analysis of stamping parts according to the following methods: 1. Read the part drawing. In addition to the shape and size of the parts, it is important to understand the requirements of the accuracy of the parts and the surface roughness. 2. Analyze whether the structure and shape of the parts are suitable for stamping processing. 3. Analyze whether the reference selection and scale labeling of the parts are reasonable, and whether the scale, orientation and shape accuracy are suitable for stamping processing. 4. Whether the surface roughness requirements of the section of the blanking part are too high. 5. Whether there is a large enough production batch. If the manufacturability of the part is too poor, you should negotiate with the planner and propose a plan to revise the plan. If the production batch is too small, other production methods should be considered for processing. 15 years of ingenuity focused on metal stamping hardware, workshop production area of u200bu200b5,000 square meters, hundreds of precision processing production equipment, daily production capacity of 3 million strokes, 16 quality inspections are strictly controlled. Solve your time problem, solve your delivery problem, solve your quality problem.