Stamping parts processing factory talk about the precautions when designing automotive stamping parts

Generally, the process of stamping parts processing plant to produce auto parts is: stamping---cleaning---welding---degreasing---cleaning---electrophoresis, etc.; 1. stamping parts processing plant is designing the structure and shape of auto parts , It is best to adopt a simple and reasonable structure, and at the same time, try to minimize the number of processed surfaces and the smallest processing area; 2. The materials used in automotive stamping parts must not only meet the technical requirements of product design, but also meet the stamping parts processing plant The requirements of the stamping process in, and the processing requirements of cutting, electroplating, cleaning and other processes after stamping; 3. The requirements of automotive stamping performance in stamping parts processing plants For the forming process, in order to facilitate the improvement of stamping deformation and the quality of parts, The material should have good plasticity, a large plate thickness directivity coefficient, a small plate plane directivity coefficient, and a small ratio of the yield strength of the material to the elastic modulus. For the separation process, the material does not need to have good plasticity, but it should have a certain degree of plasticity. The better the plasticity, the more difficult it is to separate. Recommended article: How to choose a suitable lubricant in the deep drawing of stamping parts? Previous post: How to calculate the bending force in the production of metal stamping parts