Stamping parts processing in Wenzhou, using mature technology to provide customers with satisfactory results

In the process of stamping parts processing in Wenzhou, there are often some bad problems in the design and processing of molds. Xiaoshuo briefly introduces a few points, let you understand together: 1. When punching the convex hull with the composite mold structure, the length of the punch is equal to: the thickness of the splint + the thickness of the stop baffle + the thickness of the stripping plate + the height of the convex hull. 2. That is, when punching, when the die is killed on the punch, the punch needs to be higher than the stripper, how much higher? Of course, how high the convex hull is required, and how high it is here, must be within the required accuracy range of the height of the convex hull. 3. When the mold is opened and the mold is opened, and the mold does not bear any force, the convex hull punch must be shorter than the stripper and retract into the stripper, otherwise the stripping stroke will be increased. 4. When punching the convex hull of the composite mold, when the mold is hit, the stripper must be pressed first, and the pressing force must be sufficient, and then the convex hull is punched, otherwise the product may be deformed and the convex hull size may be unstable. Hardware, 15 years of craftsmanship focused on stamping parts processing in Wenzhou, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!