Stamping parts processing plant, communicate with you what process performance the stamping die should have

Stamping parts processing plants, the stamping dies produced are related to the quality of precision stamping parts. Therefore, there are high requirements for the manufacture of precision stamping dies. In order to ensure the manufacturing quality of precision stamping dies and reduce production costs, precision stamping dies The production material should have the following technological properties: 1. Forgeability: It has low hot forging deformation resistance, good plasticity, wide forging temperature range, forging cracking cold cracking and low tendency to precipitate network carbides. 2. Machinability: Large cutting consumption, low tool loss and low surface roughness. 3. Annealing processability: Wide spheroidizing annealing temperature range, low annealing hardness and small fluctuation range, high spheroidizing rate. 4. Hardenability: uniform and high surface hardness after quenching. 5. Hardenability: After quenching, a deeper hardened layer can be obtained, and it can be hardened by using mild quenching medium. Hardware, 15 years of ingenuity and focus on stamping parts processing factory, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspection layers are strictly controlled . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!