Stamping parts production plant, stamping die maintenance +15 years of focus on manufacturers

Stamping parts production plants, stamping dies used in the production of stamping parts, will have a variety of undesirable causes due to a variety of factors. Therefore, the stamping plant needs to carry out reasonable maintenance and maintenance of the stamping die. Xiaoshuo will understand with you: 1. In the process of using metal stamping dies, there will be phenomena such as broken punches, twists and gnaws. The punch sleeves are usually broken, and the damage of the punch and the punch sleeve is generally the same. A standard part is replaced. 2. The pressing parts in the metal stamping die, such as the pressing plate, Uniglue, etc.; the unloading parts such as the stripper, pneumatic ejector, etc. During maintenance and maintenance, check whether the parts and accessories are damaged. If there is damage, make corrections in time. Check whether there is any air leakage in the pneumatic jacking material, and adopt measures for the detailed conditions. If the trachea is damaged, it can be replaced. 3. Springs and other elastic parts in metal stamping molds are easily damaged during use, and usually show cracking and deformation; maintenance methods can be replaced, but in the process of replacement, you must pay attention to the standard and type of springs, springs The standard and type of the product go through three major items: color, outer diameter and length, and can be replaced only when the three items are the same. Hardware, 15 years of ingenuity and focus on stamping parts production plant, 20,000+ sets of stamping die customized production experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!