Steps and characteristics of making circular stamping parts;

The stamping parts processing plant processes all kinds of stamping products, including round stamping parts. So what are the steps and characteristics when producing round stamping parts? 1. Need to form circular stamping parts; 2. Put the formed circular stamping parts into a blanking die with two holes for stamping processing. During the stamping process, the first positioning of the strip body is positioned by the two inclined sides of the parallelogram length direction, and the positioning of the strip body is positioned by the hole edge of the circular stamping part after the blanking; 3. If it is to improve For processing efficiency, two rows of circular stamping parts can be arranged in the strip, and the two rows of circular stamping parts are arranged staggered; when the stamping parts are processed, the positioning of the strip is positioned on the four sides of the rectangular strip; although this method Although the processing efficiency is improved, the utilization rate of the stamping parts is not high, and the processing cost is relatively increased; 4. The horizontal section of the formed circular stamping parts is a parallelogram, and the two sides of the parallelogram length direction are inclined. The circular stamping parts made by this strip can improve the utilization rate of materials and reduce the processing cost. At the same time, during the stamping process, the strip must be positioned once every time the stamping is performed, the quality of the round stamping parts produced will be better; Source: What should be paid attention to when processing aluminum stamping parts in stamping parts processing plants? Previous post: How to improve the automation of stamping parts processing and production?