Strength of stamping parts

Metal stamping parts are mainly formed by stamping metal or non-metal sheet materials with the pressure of a press through a stamping die. It mainly has the following characteristics: 1. Stamping parts are manufactured by stamping under the premise of low material consumption. The parts come out with light weight and good rigidity, and after the sheet metal is plastically deformed, the internal structure of the metal is improved, so that the strength of the stamping parts is increased. 2. The stamping parts have high dimensional accuracy, the same size as the mold parts, and good interchangeability. No further machining is required to meet general assembly and use requirements. 3. During the stamping process, because the surface of the material is not damaged, the stamping parts have a good surface quality and a smooth and beautiful appearance, which provides convenient conditions for surface painting, electroplating, phosphating and other surface treatments. Standardization and development of mold bases, mold bases, and guides. Simple molds (for small batch production), composite molds, multi-station progressive molds (for mass production), and the development of rapid mold change devices, which can reduce production preparations for metal stamping parts The workload and shortening of preparation time enable the advanced stamping technology suitable for mass production to be reasonably applied to small batch and multi-variety production. Previous: Benefits of stamping process