Suzhou manufacturers of automotive precision stamping parts, how to strengthen testing to ensure more qualified results

Suzhou manufacturers of automotive precision stamping parts, after each automotive stamping part is produced, for your one-tenth thousand mistakes, it is the principle that all users are bad, and a variety of inspections should be carried out on stamping parts. What methods are generally used for detection? Xiaoshuo organizes a few points: 1. Wipe the surface of the outer cover with a clean gauze. Then use a clean brush to apply oil evenly to the entire outer surface of the stamping in the same direction. Put the oiled stamping parts under strong light for inspection. It is recommended that the stamping parts be erected on the car body. This method can easily find tiny pits, pits, and ripples on the stamping parts. 2. Wipe clean the surface of the outer cover with a clean gauze. Use a flexible sand net to close the surface of the stamping part and grind it to the entire surface in the longitudinal direction. Any pitting or indentation will be easily found. 3. Wipe the surface of the outer cover with clean gauze, and then polish with oil stone (20×20×100mm or larger), and polish with relatively small oil stone in the arc and hard-to-reach places (such as : 8×100mm semi-circular oilstone) 4. Put the stamping parts into the inspection tool, and test the medium pressure parts of the automobile according to the operating requirements of the inspection tool manual. Hardware, 15 years of craftsmanship focusing on automotive precision stamping parts Suzhou manufacturer, 20,000+ sets of mold customization processing and production experience, daily production capacity of 3 million punching times, stamping accuracy up to ±0.01mm, 16 quality inspection layers are strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems.