Take you to understand the difference between spring washers and flat washers-

Dongguan Hardware Co., Ltd., as a manufacturer specializing in the production of flat washers for 15 years, has accumulated 2000 sets of stamping die processing experience, with a daily production capacity of 3000000+ stampings. Next, Li Xiaoshuo will briefly introduce you the difference. First of all, spring washers have anti-loosening function, but ordinary flat washers have no anti-loosening function. The bolts that connect the motor and the frame should use spring washers, because the motor will vibrate after starting, the use of spring washers will prevent the nut from loosening, and the use of ordinary flat washers will easily make the nut loose. Secondly, the flat gasket can increase the contact area between the fasteners. The flat washer can be used on a bearing seat, because the bearing seat is opened with a long and narrow hole, and the contact area can be increased after using the flat washer. This is the main difference between spring washer and flat washer. When using it, you should choose the appropriate gasket according to the characteristics of the two. But one thing to note is that the spring washer is only used when the motor vibration is not large. If the vibration is large, the double nut anti-loosing method or other methods should be used. 15 years of processing experience in the metal stamping parts industry. More than 20 imported equipment, with a daily production capacity of 3 million strokes. Is a trusted partner of customers. Need to know more, welcome to consult