Talking about the matters needing attention in the processing of precision stamping parts [hardware]

In order to ensure the normal progress of stamping production and the goal of non-hazardous production in the processing of precision stamping parts, when stamping precision stamping parts, operators need to pay attention to some important matters in addition to complying with the various systems stipulated by the workshop. The following hardware panda will organize and introduce for you. 1. Before starting work, the operator should check and organize the press and the work site: check whether the precision stamping parts and precision terminal die are clean; check the fastening of the die and the fixing on the press; check the thickness of the material and Surface cleanliness; check the lubrication of the press and prepare a waste box. At the same time, put precision stamping parts and precision terminal blanks in designated locations for easy access. 2. When working, always follow the non-hazardous regulations. For example, when stamping, you must always implement the required non-hazardous systems; when you work, you must wear overalls, wear a work hat, work carefully, always stick to the post, and focus on your thoughts to prevent personal accidents. 3. Operate strictly in accordance with the various contents stipulated in the precision stamping process regulations, and focus on thinking when working. The first piece of precision stamping parts must be inspected and can be produced only after being qualified. During the stamping process, self-inspection and special inspection should be carried out at any time, and the host cannot put double materials and clean up the waste in time. In the event of a failure, the machine should be shut down immediately and reported to the relevant department in time, and the production can only be started after normality is restored. 4. After finishing the work, first turn off the power switch. Clean the press, precision stamping parts, and precision stamping dies, apply lubricant to the working parts of the die, and sort out the parts, waste products and waste materials. If you want to know more about precision stamping parts, or have needs in this area, you can add V: understand.