Teach you how to set up a continuous mold, and quickly collect it

Since metal stamping parts are used in all walks of life, and some parts are used in large quantities, then mass production can be achieved. Usually we will design continuous die stamping, which saves time, effort and cost, and we serve multiple purposes. How to set up the mold, what should be paid attention to when setting up the mold, today the little author will share with you the experience: Precautions before the continuous mold stamping of the mold set: 1. Choose the appropriate press tonnage for the product, and check whether the closing height of the mold is in the press 2. The work surface of the press must be cleaned up, and there must be no tools, parts and other sundries. There must be no sundries at the bottom of the mold base of the continuous mold, and the assembly must be flat; 3. The continuous mold must be installed in the press The middle position of the table; 4. The press stroke must first select the inch movement; in the continuous die stamping frame: 1. When the continuous die is pressed down, the slider should be raised first, and the inching method will be used to lower it to the point; 2. The continuous die pad It must be flat, check whether the force is balanced when assembling, and pay attention to whether the leakage port is blocked to prevent the mold from being crushed; 3. The forming mold should be locked first, and the slider should be adjusted to a proper closing height before locking the lower mold. ; After the continuous die stamping and setting the mold: 1. Check whether the upper and lower molds are locked; 2. Check whether the accessories are fully installed; 3. Clean the mold loading table and leave the tool; The above article comes from the processing of metal stamping parts and the customization of automobile stamping parts 18 years of original () enterprise original, please indicate the source for reprinting. [Related recommendation] Learn more: How much do you know about new energy automobile stamping parts? Learn more: Experience sharing in the stamping processing industry Learn more: How to draw a drawing of precision metal stamping parts, please understand these steps