The addition of tensile ribs in Dongguan stamping hardware can further enhance customer needs-hardware

In the design of stamping die, Dongguan stamping hardware has the production of additional stretch ribs to stabilize the performance of the die, improve the efficiency of production, and improve the quality of stamping parts. Set up stretch ribs that can produce greater resistance to increase the resistance of the feed, so that the material produces greater plastic deformation to meet the requirements of plastic deformation and plastic flow of the material. At the same time, by changing the size and distribution of the resistance of the stretched ribs, and controlling the speed of the material flowing into the mold and the amount of feed, the effective adjustment of the tensile force and its distribution in each deformation zone of the stretched part is realized, thereby preventing stretching Product quality problems such as cracks, wrinkles, and deformation during forming. It can be seen from the above that in the process of drawing up the stamping process and mold design, the tensile resistance must be considered, and the tensile ribs should be arranged according to the range of the blank holder force and the form of the tensile ribs should be determined so that each deformation area is deformed as required. The way and the degree of deformation are completed. Dongguan stamping hardware solves customer needs, meets customer needs, improves the performance of stamping parts, and enhances the value of customer products. Hardware, 15 years of ingenuity and focus, 15 years of unremitting efforts, 15 years has been the icing on the cake for the development of customers in the industry!