The application of three-coordinate measuring instrument in the processing of stamping parts

Stamping parts are formed by applying external force to plates, strips, pipes and profiles by means of presses and dies to produce plastic deformation or separation, so as to obtain workpieces (stamping parts) of the required shape and size. Stamping processing includes punching, bending, stretching, forming, finishing and other processes. Sheet forming refers to the forming method in which sheets, thin-walled tubes, thin profiles, etc. are used as raw materials for plastic processing, collectively referred to as sheet forming. At this time, the deformation in the direction of the thick plate is generally not considered seriously. The testing of stamping parts mainly includes hardness testing, size testing, etc. The main purpose of hardness testing is to determine whether the annealing degree of the purchased metal sheet is suitable for the subsequent stamping processing. Different types of stamping processing procedures require different hardness levels. Sheet. The aluminum alloy used for stamping parts can be tested with a Webster hardness tester. When the thickness of the material is greater than 13mm, a Barcol hardness tester can be used. The pure aluminum plate or low hardness aluminum alloy plate should use the Barcol hardness tester. The size measurement of stamping parts is mainly for product design and improvement, and the imported reducer is reverse-engineered. Therefore, when choosing a three-coordinate measuring machine, it is necessary to consider the requirements for powerful CAD functions in the software function. The three-coordinate measuring machine adopts the industry benchmark software PC-DMIS, which has the function of importing CAD models to compare digital and analog. It can also provide reverse CAD measurement. At the same time, relying on the global resources and technical advantages of Hexagon, the world’s largest measurement technology group, Siri’s three-coordinate measuring instruments use imported parts from world-renowned suppliers and assembled in China, which further improves the product’s performance. Cost-effective, complete the detection of different features of any workpiece. The stamping industry is an industry that involves a wide range of fields and goes deep into all aspects of the manufacturing industry. The application of the three-coordinate measuring instrument in the stamping industry has greatly improved the detection, design and reverse engineering of stamping parts and promoted the development of the stamping industry. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections