One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
The care items of metal drawing stamping mould + more than 20 experienced mould engineers
Compared with ordinary metal stamping parts, metal drawing stamping parts are more exquisite in workmanship, but their production is difficult and the process is more complicated, so the loss of stamping dies is relatively large. So Xiaoshuo has sorted out some care items for the metal drawing stamping die, and I will share with you: 1. Regularly check the turntable of the drawing stamping punch and the mold installation base to ensure that the upper and lower turntables are the same. Axis accuracy. 2. The drawing metal stamping parts should be strictly inspected before installation and use, and the dirt should be cleaned up. Carefully check whether the guide sleeve and die of the drawing stamping parts are well lubricated. 3. In order to ensure the service life of the drawing stamping parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the drawing stamping parts. 4. When installing the mold, the stamping personnel should use softer metals (such as copper, aluminum, etc.) to make operating tools to prevent damage to the drawing stampings during the installation process. 5. When the punch and die edges of drawing stamping parts are worn, they should be stopped in time and sharpened in time. Otherwise, the wear of the die edge will be rapidly expanded, the wear of the die will be accelerated, and the quality and life of the die will be reduced. Dongguan Hardware Co., Ltd. has been dedicated to precision metal stamping molds and precision metal stamping fields with 15 years of ingenuity. After more than ten years of development, it has a complete set of high-precision equipment and technical team as well as sound scientific management in the precision metal stamping industry. It has a monthly processing capacity of 100 sets of precision molds and a daily production capacity of 3 million strokes. More than 20 mold engineers with more than ten years of experience.