The characteristics of scaffolding stamping parts processing

Scaffolding stamping parts tend to show some more prominent features when they are being processed. Do you know what the degree has? Regarding this issue, I believe that we are more interested, so let's make a brief introduction for us, hoping to help us, and at the same time, we also hope to deepen our knowledge and understanding of scaffold stamping parts. First of all, let's take a look at the one characteristic that is reflected during the processing of scaffold stamping parts. We can clearly see that the pressure straight to the surface of the board, although not very large, is sufficient to ensure that the workpiece is deformed. Regarding this issue, we can understand this way, under normal circumstances, the pressure straight to the plate surface is very low, not enough to consume the internal stress generated, therefore, most of the stamping deformation can actually be regarded as the state of plane stress. To deal with it, in this way, the time for analysis can greatly reduce the amount of work. Another feature is that after this treatment method, the relative thickness of the obtained scaffold stamping parts is often very small. Therefore, under the effect of pressure, its anti-instability performance is not ideal. Therefore, if there is no additional anti-instability equipment, then it may not be able to smoothly complete the stamping process under its own conditions. In addition, at the time of stamping and forming, the value of the internal stress of the blank must not exceed the yield stress of the material. In addition, I don't know if we understand that, many times, the blanks of scaffolding stamping parts actually have a certain degree of freedom, often only a certain appearance touches the mold. Therefore, in such a case, the part of the blank can be deformed because the mold exerts a certain effect force on its adjacent part to form it. In short, during the processing of scaffolding stamping parts, such characteristics may be reflected. Discussing these contents will help us to better carry out the next operation and also help us to further improve the quality of processing. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections