The common problems of metal molds in the production process of stamping processing plants

Everyone who knows the stamping factory knows that stamping dies are the basis for processing hardware products. If there is a problem with the hardware dies, the entire production will also be affected. So let the author explain, what kinds of problems will it have? In the stamping process, the place where the mold bears the greatest pressure is the concave-convex module of the entire mold. If the design is improper, it is easy to break. When designing hardware molds, stamping factories should choose suitable materials according to the products. Heat treatment of the molds is also very important. It should be in the appropriate hardness range and the gap of the mold should be in a reasonable range. If the gap is enlarged, the burr of the product will be large, and the knife edge of the mold will always be injured when the gap is small. Of course, the problems that stamping factories will encounter in daily production are not only these. 15 years of hardware stamping experience. More than 20,000 private molds, more than 20 professional hardware mold processing team. Is your ideal choice, choose a stamping factory,