The correct storage method of scaffolding stamping parts

Scaffolding stamping parts can be seen in many construction occasions. It can be said that the current application range of this product is quite extensive. However, no matter what kind of structure the scaffold stamping parts are used as components, we need to pay attention to them in use, and we should pay attention to choosing the correct storage method when storing to avoid corrosion. How to deal with such a problem? In fact, we have certain requirements regarding the use of scaffolding stampings. For example, the corrosion depth of the product surface and the degree of bending deformation must be within the scope of the regulations before it can be used. In addition, rust inspection should be maintained once a year. At the time of inspection, be sure to select three products from the severely corroded products, and then check the corrosion. If it exceeds the specified value, it cannot be used again. The reason for this requirement is that once the scaffolding stampings show corrosion problems, their serviceability will decline and become weaker, especially the metal raw materials will appear very weak after they show corrosion. In this case, it will bring us a great constant and negative impact when using it. Therefore, in our daily work, we must pay attention to taking some measures to prevent this problem as much as possible, and do a good job of inspection. If it is found that it cannot be used, it must be replaced in time. In addition, it should be noted that when we use scaffolding stampings, we do not allow holes to be drilled on the surface, nor should the steel pipe be flattened or scratched. When using, it should be handled with care and littering is not allowed. When it is piled up, it should be placed neatly, and certain anti-rust measures should be taken. Another aspect that needs attention is that in daily work, we must pay attention to that when the bolt tightening torque reaches 65N.m, the scaffolding stampings should still maintain outstanding performance and must not be damaged. Related news: The characteristics of the main materials of stamping parts, the handling of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections