The difference between blind riveting nuts and pressure riveting nuts

Blind rivet nuts are widely used in the field of fastening, mainly used in the assembly of electromechanical and light industrial products such as aviation, furniture, automobiles, instruments, machines, and decorations. Of course, it is more ordinary than the blind rivet nut, and it is often difficult to distinguish.

First of all, in terms of appearance, you can take a look at the different effects of appearance.

From the appearance point of view, the difference between blind riveting nuts and pressure riveting nuts is still very big, but their main functions are almost the same. They are all provided with threads for thin plates, but the installation method is different. The method of installation greatly determines the purpose and use of a nut.

First of all, the installation method of the blind rivet nut is to use a blind riveting gun to pull riveting, so it is suitable for use in places like square pipes and round pipes that are not easy to press riveting. Blind rivet nuts also make up for some of the shortcomings of electric welding, such as aesthetics, and places that are not easy to weld, such as thin plates. Blind rivet nuts are mostly used in some cabinets, square pipes and round pipes, fan production, equipment production, and zinc steel guardrails.

Secondly, let's talk about the pressure riveting nut. The pressure riveting nut is also used on the upper side of the cabinet to provide the thread. Its operation method is to use the riveting machine to perform the riveting. In this case, the requirements will be higher, and a riveting machine is required. The pressure riveting nut is very flat and will not have protrusions after being riveted to the upper edge of the sheet. Pressure riveting nuts are mainly used in the production of some cabinets and cabinets, as well as in the production of equipment, water pumps, automobiles, and many other manufacturers. (Guide: The thread rolling process of high-strength bolts)

The most important point is that blind rivet nuts can be used on top of finished and semi-finished products, while pressure rivet nuts must be used on the upper side of thin plates. The finished product cannot use pressure rivet nuts because it is not suitable for the operation of the pressure riveting machine. .

More related hardware stamping parts industry news: