The flatness of the shield---Dongguan Precision Metal Stamping Factory

During the years of working in a metal stamping factory, there have been many technical cases in the workshop. For example, the RS-66810 shield produced today. This metal stamping shielding bracket, because the product size is relatively large, the structure is relatively weak, the material is 0.15 thickness nickel silver, the surface of the product has only one patch nozzle position, and everything else is basically empty. Such a metal stamping product. The problem of dimensional tolerances is not a problem. However, because there are 13 solder joints, it is still very difficult to control the flatness within 0.07. First, Master Li assembles the mold, sets the mold on the machine, loads the material, and debugs. After the author has produced the shape, the quality inspection size is related. But the flatness is not enough. Mold repair and debugging. Re-repair the mold and then debug. After several mold improvements, the leveling block was adjusted. For metal stamping, 100 first pieces will be confirmed, and all good products will be inspected. Sweat will not be wasted, and hard work will not be wasted. Every piece of hardware stamping products delivered from the factory can feel the smile of customer satisfaction! Please contact us: