The influence of the lubrication of the mold in the production of stamping hardware on the customized mold-hardware

We know that in the production of stamping hardware, because the stamping production process is a cold stamping process, the wear of the stamping die is relatively serious. But for customer-customized molds, each customer's idea is whether the quality of the mold meets the standard, whether the delivery is timely, and whether the accuracy is within tolerance. Therefore, we have the responsibility and obligation to do a good job in the maintenance of molds in production and non-production. Good lubrication can prevent the mold from rusting, reduce frictional heat, friction, and punching force, reduce mold wear and extend the life of the mold. For example, when punching silicon steel sheets in transformers, if the lubrication is good, the life of the mold is about 15 times that of the mold with poor lubrication. In addition, the proper use of lubricants can also extend the life of the mold. For example, when performing extruding operations on stainless steel surfaces, if the extruding operations are lubricated with general oil, only 90 pieces can be produced during the life of the mold; if they are lubricated with molybdenum disulfide lithium-based grease, they can produce about 1.2 Ten thousand pieces, the two are very different. Hardware, stamping hardware, 15 years of ingenuity and dedication. We have 2000+ sets of customized mold making and production for customers. Cherish your choice, cherish your mold, and cherish your demand for the time and quality of the next batch of orders. Choose, choose rest assured!