The key to precautions for stamping parts processing is preliminary analysis

Stamping parts processing, like the same thing before we start to do, we first plan a principle beforehand. First, analyze the accuracy, appearance, bending, stretching, etc. of the stamping parts from all aspects, and then do the next step. First analyze the product, what kind of mold making structure the product needs to use, arrange the processes in the product processing process, determine the content to be processed in each process, and perform actual mold layout on the software. When the product mold is produced and expanded, the processing content is generally from the back process to the front row. For example, product molding requires five processes. When the stamping is completed, the product drawing starts from the product drawing to the fourth project, the third project, the second project, and the first project when the product is unfolded. After unfolding a graphic, copy a copy and then carry out the unfolding work of the previous project, that is, the product unfolding work of the five projects is completed, and then detailed work is performed. Note that this step is very important and requires special care. If this step is done well, it will save a lot of time in drawing the mold diagram. After the content of each project is determined, the product material thickness is included in the forming mold. The inner and outer lines are reserved for use when determining the size of the convex and concave mold. Hardware, 15 years of ingenuity focusing on stamping parts processing, 20,000+ sets of stamping die custom processing and production, skilled cooperation experience in more than 20 industries such as automobiles, communications, electronics, and home furnishing. The daily production capacity is 3 million strokes, and the quality is strictly controlled by 16 quality inspections. It can quickly solve time-critical problems, stamping accuracy problems, and mass production quality problems for you.