The metal stamping parts processing plant solves the problems with the pace of growth [Hardware]

When the metal stamping parts processing plant encounters large collapse and inclination angles of the shear section, the middle part is obviously concave. The burrs are not only high, but also have a triangular cross section, which cannot be removed without using a file. Such stamping parts are generally defective products. Xiaoshuo will analyze the reasons and solutions with you: Causes: 1. The gap is too large. 2. The verticality of the die decreases during multiple grinding. For the full taper die, it appears due to re-grinding. Very bad. The solution is to reduce the gap: 1. The shape is simple, and the volume can be reworked. 2. Stamping small and thin products can be processed by EDM hardening. 3. Anneal the mold, sharpen the edge, and then heat and grind. 4. Surfacing repair treatment. 5. When pressing the inlay block, use a mold backing plate, and then process it after pressing out the blade. Hardware, 15 years of ingenuity and focus on metal stamping parts processing plant, 20000+ sets of stamping die custom production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve the stamping accuracy problem for you, solve the urgent problem of time, and solve the problem of production quality. Choose, choose rest assured!