The prerequisite for stainless steel stamping is reasonable design [hardware]

Stainless steel stamping and design are the prerequisites for qualified products. A piece of beautiful appearance, precise size, bending, punching, and stretching are all the results of the designer's efforts. So what should be paid attention to in the design of stainless steel stamping? 1) When designing the product, the connection of each straight line or curve of the blanking piece should be properly rounded. (Reason: 1. The small R angle of ordinary wire cutting is 0.2, and the sharp corner is not easy to guarantee. 2. The concave die at the sharp corner The stress is concentrated, and the mold is easily damaged after being stressed.) 2) The direction of the burr should be indicated when the product is designed. The burr is very important to the assembly of the product and the body of the operator. (Note: the direction of the burr is marked, not the direction of stamping) Hardware, 15 years of ingenuity and focus on stainless steel stamping, 20,000+ sets of customized mold processing and production experience, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punches, The stamping accuracy can reach ±0.01mm, and 16 quality inspection procedures are strictly for quality control. It can quickly solve the time-critical problem for you, solve the precision problem of choosing stainless steel stamping for you, and solve the quality problem of mass production for you.