The production of precision metal stamping parts requires the determination to overcome all difficulties

In the production of precision metal stamping parts, stamping plants often encounter many problems during the manufacturing process. Actively find out the problem and solve the problem correctly, which is the right way to give the customer results. Many problems often appear in the stamping process: the common quality defect of the parts is the size error of the metal stamping parts. Dimensional error is the problem of stamping parts. In this regard, check the design of the mold and eliminate the reasons for design and manufacturing. If the size of the error is related to the thickness of the material, the thickness, material and hardness of the stamping material should be tested. The dimensional error of the metal stamping parts caused by the stamping production process: mainly due to the wear of the mold, the poor positioning and guidance and the deformation of the parts. The wear of the cutting edge of the mold will cause the burr to be too large or the shape of the cut to become larger, the punching to be smaller, and the flatness is out of tolerance. The mold should be sharpened or replaced. Poor positioning and guidance include no guide, guide pins or other positioning devices that are not working, the feeder is not loosened, the positioning block is worn and the feed distance is too long, the length of the guide plate is incorrect, or the guide gap is too large. Hardware, 15 years of ingenuity focused on the production of precision metal stamping parts, 20000+ sets of mold custom processing production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, 16 quality inspection layers The layer is strictly for quality control. You can quickly solve time-critical problems, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!