The requirements that stamping materials should meet

Only when there are standards, there are good and bad products, and only when there are requirements to make good products, what requirements should the stamping processing materials meet to produce good products? 1. The material used for blanking should have sufficient plasticity and low hardness to improve the quality and dimensional accuracy of the blanking section. 2. The material used for bending should have sufficient plasticity, low yield strength, and High elastic modulus 3. The material used for deep drawing should have better plasticity, lower yield strength and hardness, and larger plate thickness directivity coefficient 4. The surface of the material should be smooth and clean, free of scratches and scratches. In order not to affect the appearance quality of the product, it is convenient for stamping processing, welding, spraying and other subsequent processing 5. The thickness tolerance of the material should meet certain requirements: if the thickness of the material is out of tolerance, it will not only directly affect the stamping quality of the product and the life of the mold, but it may even produce waste or damage the mold. The hardware has 15 years of high-quality stamping experience and multiple material quality checks, which provide a good foundation for producing good products. Choose, choose rest assured!