The role of precision mold adjusting rod--

The role of precision molds/precision stamping parts/precision mold adjustment rods In order to ensure that the precision molds can be adjusted quickly and effectively in the production process, an adjustment rod station is added to the precision molds, but the following should be noted when using the precision mold adjustment rod Matters can get twice the result with half the effort. 1. When the precision mold needs to adjust the size, please confirm whether your mold height is correct, especially when transferring the order, compare the material tape of the closed order to see if the product shape or chamfer is OK. 2. Do not use too much force when adjusting, just use the power of your thumb and index finger, do not use the power of your wrist to lock, and do not use a vise or other tools to screw it. The two screws should be matched, especially when adjusting to the bottom. The right angle (R angle) of the adjusting rod is easy to break. 3. When retracting outwards, pay attention to the withdrawal limit of the adjusting rod to prevent the working spare parts from falling after the adjusting rod is pulled out. 4. When adjusting a certain size, note that it may cause changes in the associated size. 5. After the adjustment, we must first pay attention to the appearance of the terminal, especially whether there is a stamp (imprint) at the dot position or force. And abrasions etc. 6. After each adjustment, the tightness of the adjusting screw of the adjusting rod and the fixing screw lock must be the same, and the adjusting method of the adjusting rod must be the same. 7. During each adjustment, the amount of adjustment should not be too much to prevent squeezing or collapse of spare parts caused by this. 8. For the situation that can be adjusted small but not large, we should consider whether the front position of the adjustment has been formed smaller. 9. When adjusting multiple places of the terminal, pay attention to the order of adjustment. (For example: adjust the height of the bomb first, then adjust the linearity.) 10. When adjusting, adjust different variables according to the force of the point of application. For example, the position of the dot and the fan shape are related to the size of the dot. When the dot is large, The changes caused are drastic. 11. The size is unstable after adjustment, and the reasons for large changes should be considered, such as: loose parts in precision molds, waste in metal molds, abnormal materials, improper use of working oil, etc. 12. Under normal circumstances, the punch is at the upper starting point during adjustment, but sometimes it is necessary to detect and adjust the limit at the bottom dead point. 13. The adjustment is OK. After a period of production, we must confirm whether the size has changed. The role of precision mold adjustment stalk is very large, which saves a large part of the maintenance time for our production and directly improves the production efficiency. Dongguan Precision Electronic Technology Co., Ltd. is a professional manufacturer specializing in the design and production of precision stamping dies and precision hardware stampings. We sincerely welcome your inquiries and orders.