The safety management content of scaffolding stamping construction personnel

In the construction of scaffolding stamping parts, we not only need to ensure the orderly progress of each production work, but also need to do the corresponding safety management work. In fact, the construction safety management of scaffolding stamping parts is a necessary prerequisite for the smooth progress of the production work. If there is an unexpected situation during the work, it will inevitably bring some negative effects to our work. So, as the staff of the production enterprise, how do we do a good job in safety management? Especially in the construction of scaffolding stamping parts, how to grasp the safety issues? In response to this problem, there are actually relevant regulations in the country. First, the staff engaged in the erection of the frame must undergo professional training, and the professional staff who have obtained the qualification certificate after participating in the assessment. Of course, in the actual construction, especially when participating in the installation, lifting, and disassembly of the attached lifting scaffold stamping parts, under normal circumstances, you must also have the lifting scaffold issued by the construction administration department for on-duty operation Only when such conditions are met can they be employed to perform operations. In addition, for all staff on duty, regular inspections must be carried out, and only after passing the inspections can they work with certificates. If it is a person suffering from a disease that is not suitable for high-altitude work, it should be forbidden to participate in high-altitude work. In addition, all scaffolding workers must wear safety helmets, safety belts, and non-slip shoes when working. The above content is a summary for everyone about the safety management requirements of scaffolding stamping construction workers. I hope that through this introduction, everyone can realize the importance of this problem, and work hard to do this work in a responsible manner to ensure production. The work goes on smoothly. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections