The working process of the stamping factory producing precision stamping parts-hardware

The hardware stamping parts we use in our work, the development and progress of technology at will, and the requirements for precision are getting more and more refined. How is a precision stamping part produced in a stamping factory? Xiao Shuo will take you to understand: a) The mold is opened and the metal raw materials are fed; b) The mold is closed, and the materials inside and outside the cutting edge (blanking line) are compressed by the ring gear force and back pressure; c) The punching force is used PS blanking material, the pressing force PR and PG are effectively pressed during the whole process; d) At the end of the stroke of the slider, the punching part is in the die, and the waste material of the inner hole punches into the blanking punch; e) The ring gear force PR and the reverse The pressure PG is removed and the mold opens; f) At the position where the gear ring force is applied, the function at this time is: ejecting the inner hole waste and removing the unloading force PRA of the stamping overlap; g) At the position where the back pressure is applied, this The time function is: the ejector force PGA of the punching part from the die. The material starts to feed; h) blow off or remove the fine-blanking parts and inner hole waste. Material feeding is complete. Rich experience, superb technology, perfect team, company culture to meet customer needs, hardware, 15 years of stamping factory, 2 days for proofing, 4 days for mold opening, and 2 days for delivery. Satisfy your questions about samples, molds, and stamping parts delivered in batches!