Thickness of material terminal stamping processing requirements

Thickness of material terminal stamping products are widely used in our daily life. With the development of science and technology, people more and more high to the requirement of metal stamping parts. Especially in the aspect of quality and technology. In the electronic hardware stamping parts factory for stamping production quality requirement is very strict. So we particularly importance to control the shape of the material thickness of terminal stamping size: the first is for bending parts requirements: 1, the bending shape should be symmetrical, bending radius not less than the material allows the minimum bending radius. 2, the bending with hole, in order to avoid deformation of the hole. 3, short not easy forming curved edge, so should make H> straight part of the curved edge; 2δ。 If the required H is very short, the need to set aside the appropriate to increase the allowance H, good bending after all increase of metal cutting. Followed by the thickness of the material of terminal drawing requirements: 1, deep drawing parts appearance should be simple, symmetrical, depth shoulds not be too big. So that the drawing number, easy to take shape. 2, material thickness of terminal of deep drawing parts radius under the condition of without any increase in process. Precision contact: wish you a prosperous business, and treasures will be plentiful, if want to know more dynamic, can scan the qr code, pay attention to the public. , is committed to precision stamping processing factory of the world's most professional electronic components