Tianjin precision stamping parts manufacturer, this design can reduce costs

Tianjin precision stamping parts manufacturer, in the mold drawing design, should be based on the principle of reasonable design and smooth production. At the same time, it should also take into account that in the unfolding process of stamping parts, reducing waste can save customers more costs. There are two types in general design: 1. The precision stamping parts are cut or punched along the contour line of the part of the workpiece, and there are only overlaps between the workpiece and the workpiece, and between the workpiece and the side of the strip. The blanking of this nesting method is only carried out along part of the contour of the workpiece, which is affected by the quality of the cutting strip and the positioning and errors. The quality of the cutting is slightly worse, but the material utilization rate can reach 70% to 90%. 2. There is no overlap of precision stamping parts between the blanking part and the blanking part, and between the blanking part and the side of the strip. The blanking part is actually obtained directly by cutting the strip, and the material utilization rate can be Up to 85%-90%. However, this layout method will make the quality of the cut piece slightly worse. Hardware, 15 years of ingenuity and focus on Tianjin precision stamping parts manufacturer, 20,000+ sets of customized mold processing experience, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, and 16 quality inspection processes are strictly for quality control. It can quickly solve the time emergency for you, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured.