Tianjin stamping parts processing plant, how to make green molds + 20,000 sets of mold production experience

The hardware of the Tianjin stamping parts processing plant said that green manufacturing should be adopted in mold manufacturing. Now there is a laser remanufacturing technology, which uses appropriate alloy powder as the material, with the support of the original part CAD/CAM software, and uses a computer-controlled laser head to repair the mold. The specific process is that when the powder feeder and the processing machine move according to the specified space trajectory, the beam radiation is synchronized with the powder conveying, so that the repaired part is gradually welded to generate a three-dimensional body similar to the original part, and its performance can reach or exceed the level of the original substrate , This method is widely used in die repair, especially in cover die repair. Since this technology does not aim at consuming large amounts of natural resources, it is called green manufacturing. In addition, stamping process waste and structural waste should be minimized in stamping production, using materials to the greatest extent and generating waste to a minimum. Reducing process waste is solved by optimizing layout, for example, using opposite layout, cross layout and other methods, but also can use less waste and no waste layout method to greatly improve material utilization. Hardware, 15 years of focusing on Tianjin stamping parts processing plant, hundreds of processing and production equipment, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punching times, and stamping accuracy up to 0.01mm, The 16 quality inspections are strictly controlled, focusing on quality and meticulous design. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!